This is an adapter kit to use the 2007-2008 TL FlashPro for your 2004-2005 TL Type-S. This allows full user tuning and datalogging for the 2004-2005 TL Type-S.
•CAN Adapter, 04-05 TL adapter
You need to provide:
•A new or used ECU from the 2007-2008 TL (MT) or 2007 TL base AT.
ECU Part Number
RDA-A83 through RDA-A84
2007 Acura TL Base Auto*
RDB-A02 through RDB-A04
2007 Acura TL MT Type-S
RDB-A11 through RDB-A12
2008 Acura TL MT Type-S
* The Auto ECU needs a hardware modification for cruise control to work.
The CAN adapter cable connects from the DLC to the CAN bus connector. See the install instructions.
The ECU adapter connects the 07/08 TL ECU to the 04-05 TL and 03-07 Accord harness.
Not legal for sale or use in California on any pollution controlled motor vehicles. See http://www.semasan.com/emissions for state by state emissions requirements.
•Programmable ECU interface.
•Connects via OBDII diagnostic port.
•USB 2.0 connection
•Works with Laptop or Desktop
•No ECU modification necessary.
•20 hours on board datalogging memory.
•FlashProManager Windows software.
•Check and clear diagnostic codes.
•Custom laptop gauges.
•Dual calibration storage - upload from one of two calibrations stored in the FlashPro
2007-08 TL tuning features
•Ignition, fuel, idle speed, table editing.
•MAP sensor based tuning.
•Rev and launch limiters.
•Map tracing & lambda overlay.
•Expanded fuel, ignition and knock tables for forced induction.
•4 bar MAP sensor support (43 psi).
•Support for larger injectors.
•Injector latency / dead time.
•Individual cylinder fuel & ignition trim.
•Individual cylinder knock count
•Works with Hondata Traction control
•Starting calibrations for NA, forced induction & larger injectors.
For a more detailed feature lists see the FlashPro help file.